Laboratory Oven Machine
The insulation Gap between the walls is at least 100 mm. and high temperature Ceramic blanket are used as insulation material. The air circulation motor is mounted on side/top of the equipment and the blower is driven by belt pulley attachment. It protects the motor from Heat build upend damage due to it. The temperature variation is around +/- 1% of the set value on higher range. The power supply will be 220/230V AC +- 10% 50 Hz or 440V 3 phase for bigger size as per requirement.
Laboratory Oven Machine Manufacturer
SPECIFICATION | |
Temperature Controllers | Digital PID microprocessor based controller cum indicator with inbuilt timer |
Temperature Range Accuracy & Uniformity | Ambient 5C to 250 C +/-1.0 oC |
Material Chamber Outer | Double walled Stainless Steel Chamber (304Grade) Powder Coated Steel/Stainless Steel (304Grade) |
Door | Double walled sturdy door with catchers, heavy hinges and silicon gasket. |
Insulation | High grade super fine mineral glass wool between the walls. |
Heaters | “U” type air heating element |
Air Circulation | Silent fan motor with heavy duty blower. |
Ventilation | Ait ventilation ports with dampers. |
Safety | Over temperature cut off |
Electric Supply | 220+/-10, 50Hz, 1 Phase. |
Optional | |
Outer Body | Stainless Steel in lieu of power coated Mild Steel |
SR.NO | SIZE (WxHxD) | CAPACITY (Litre) | TRAYS |
1 | 300x300x300 mm | 28 | 2 |
2 | 350x350x350 mm | 45 | 2 |
3 | 450x450x450 mm | 95 | 2 |
4 | 450x600x450 mm | 125 | 2 |
5 | 600x600x600 mm | 224 | 2 |
6 | 600x900x600 mm | 336 | 3 |